- Pen kits
- Bushes for pen kits
- Pen blanks
- Marlas Feathers pen blanks
- DiamondCast pen blanks
- DC Silver Series pen blanks
- DC Radiance Series pen blanks
- Divine Island pen blanks
- Gilbert House pen blanks
- Crafted Makes Spangle Series pen blanks
- Crafted Makes Braided Series pen blanks
- Crafted Makes Carbon Fibre series pen blanks
- Blankwerks abalone pen blanks
- Flower Girl pen blanks
- GPS Alternative Natural pen blanks
- GPS Ranger pen blanks
- GPS Alternative Semi-Precious pen blanks
- GPS California series pen blanks
- Kirinite acrylic pen blank collection
- Kirinite Ice series pen blanks
- Kirinite Pearl series pen blanks
- Kirinite Stardust Glitter series pen blanks
- Minerva Acrylics pen blanks
- Cullinore Acrylique - Spellbinder pen blanks
- Cullinore Acrylique - acrylic pen blanks
- Chestnut acrylic pen blank collection
- Semplicita SHDC pen blanks
- Semplicita Nastro pen blanks
- Ebonite pen blanks
- Wood pen blanks
- Choose pen blanks by colour
- Pen blanks - reduced to clear
- Marlas Feathers pen blanks
- Bowl blanks, spindle blanks & project blanks
- Fountain pen nibs
- Understanding nibs and choosing the right one
- Bock standard size 6 fountain pen nibs (type 250)
- Bock standard size 5 fountain pen nibs (type 180)
- Beaufort standard size 5 fountain pen nibs
- Bock short body #5 fountain pen nibs (type 060)
- Bock wide shoulder #5 fountain pen nibs (type 076)
- Bock standard size 8 fountain pen nibs (type 380)
- Calligraphy (italic) fountain pen nibs
- Bock twin point #5 fountain pen nibs (type 020)
- Music nibs
- Left handed fountain pen nibs
- Non-engragved fountain pen nibs
- Ready made section sleeves for kitless pens
- Ready made nib sections for kitless pens
- Refillable rollerball nibs for kitless pens
- Understanding nibs and choosing the right one
- Fountain pen ink
- Pen refills
- Pen presentation - pen boxes, pen pouches & pen stands
- Writing accessories
- Pen making tools & drill bits
- Pen tubes, springs & spares
- Mechanisms, ink converters & pencil inserts
- Ready-made nib sections and section sleeves
- Clips for kitless pens
- Thread taps and dies
- Kitless pen making - tools and supplies for custom pens & bespoke pens
- Tutorial - An introduction to custom pen making
- Collets & collet chuck sets
- Keyless drill chucks
- Engineering micro-chucks
- Tailstock die holders
- Tailstock tap holders
- Morse taper lathe centres
- Triple lead thread taps and dies for pen caps
- Section sleeves and thread sleeves for kitless pens
- Mandrels for kitless pens and custom pen making
- Single lead thread taps and dies for pen components
- Thread taps for Bock fountain pen nib housings
- Thread taps for Bock ready made nib sections
- Thread taps for kitless pen rollerball nibs
- Bock ready-made fountain pen nib sections
- Clips for kitless pens
- Refillable rollerball nibs for kitless pens
- Drill bits
- Threadable pen blanks for kitless and custom pens
- Lubricant for pen makers
- Tutorial - An introduction to custom pen making
- Casting moulds for pen blanks
- Starbond CA superglue
- Abrasives, steel wool, finishing & polishing
- Beall Wood Buff buffing system
- Versachuck wood lathe chucks
- Lathe faceplates, micro-chucks and spindle adaptors
- Shield Technology - lubrication and rust prevention
- Super Nova1 chuck key
- Special offers & clearance
Pen turning
Fountain pen nibs
Fountain pen ink
Pen blanks
4-jaw, 50mm self-centring micro scroll chuck with reversible jaws
Faceplates, micro-chucks & spindle thread adaptors » Versachuck micro-chucks » 4-jaw, 50mm self-centring micro scroll chuck with reversible jaws
£44.95
(£37.46 excl. Vat)
Item code: vc-mc/mm54
Jut like a full sized engineering chuck, but only 50mm in diameter, our MM54 micro-chuck is ideal for small engineering tasks and spindle work, and weighs under half a kilogram.
The MM54 is a miniature, 4-jaw, self-centering scroll chuck. It comes complete with 2 sets of jaws - 1 set is internally stepped and the other is externally stepped, which allows the chuck to grip in both compression and expansion modes.
To keep the chuck small, the MM54 micro-chuck is tightened and loosed using 2 tommy bars, (supplied with the chuck) and the rear of the chuck has an M12 x 1 thread, which will mount directly onto many small engineering lathes. For people with woodturning lathes, we have thread adaptors available, with a choice of M33x3.5, 1" x 8 tpi, and 3/4" x 16tpi to suit the most common lathe spindle sizes. These screw into the rear of the micro-chuck and them mount directly onto the lathe spindle. We also have morse taper arbors available in 1MT, 2MT and 3MT, which also screw into the rear of the micro-chuck, thereby allowing the chuck to be mounted on any lathe.
Our micro-chuck is also available in a 3-jaw version. (MM50)
