- Pen kits
- Bushes, barrel trimmers & drill bits for pen kits
- Pen blanks
- Pen blanks - reduced to clear
- Marlas Feathers pen blanks
- DiamondCast pen blanks
- DiamondCast Colour Shift pen blanks
- DiamondCast Silver Series pen blanks
- DiamondCast Radiance Series pen blanks
- Divine Island pen blanks
- Gilbert House pen blanks
- Crafted Makes Spangle Series pen blanks
- Crafted Makes Braided Series pen blanks
- Crafted Makes Carbon Fibre series pen blanks
- Blankwerks abalone pen blanks
- M3 Composite pen blanks
- GPS Alternative Semi-Precious pen blanks
- GPS Alternative Natural pen blanks
- GPS Abstract Series pen blanks
- GPS California series pen blanks
- Kirinite acrylic pen blank collection
- Kirinite Ice series pen blanks
- Kirinite Pearl series pen blanks
- Kirinite Stardust Glitter series pen blanks
- Minerva Acrylics pen blanks
- Cullinore acrylic pen blanks
- Chestnut acrylic pen blank collection
- Semplicita SHDC pen blanks
- Semplicita Nastro pen blanks
- Ebonite pen blanks
- Wood pen blanks
- Whisky cask pen blanks
- Choose pen blanks by colour
- Pen blanks - reduced to clear
- Pen blanks on a theme
- Ring blanks, bowl blanks, spindle blanks & project blanks
- Fountain pen nibs
- Understanding nibs and choosing the right one
- Bock standard size 6 fountain pen nibs (type 250)
- Bock standard size 5 fountain pen nibs (type 180)
- Beaufort standard size 5 fountain pen nibs
- Bock short body #5 fountain pen nibs (type 060)
- Bock wide shoulder #5 fountain pen nibs (type 076)
- Bock standard size 8 fountain pen nibs (type 380)
- Calligraphy (italic) fountain pen nibs
- Bock twin point #5 fountain pen nibs (type 020)
- Music nibs
- Left handed fountain pen nibs
- Non-engraved fountain pen nibs
- Ready made section sleeves for kitless pens
- Ready made nib sections for kitless pens
- Refillable rollerball nibs for kitless pens
- Nib storage
- Pen Purge - cleaning fluid for fountain pens
- Understanding nibs and choosing the right one
- Fountain pen ink
- Pen refills
- Pen presentation - pen boxes, pen pouches & pen stands
- Writing accessories
- Pen making tools & drill bits
- Pen tubes, springs & spares
- Mechanisms, ink converters & pencil inserts
- Ready-made nib sections and section sleeves
- Clips for kitless pens
- Thread taps and dies
- Kitless pen making - tools and supplies for custom pens & bespoke pens
- Tutorial - An introduction to custom pen making
- Collets & collet chuck sets
- Keyless drill chucks
- Engineering micro-chucks
- Tailstock die holders
- Tailstock tap holders
- Morse taper lathe centres
- Mandrels for kitless pens and custom pen making
- Marking & Measuring
- Triple lead thread taps and dies for pen caps
- Single lead thread taps and dies for pen components
- Thread taps for Bock fountain pen nib housings
- Thread taps for Bock ready made nib sections
- Thread taps for kitless pen rollerball nibs
- Section sleeves and thread sleeves for kitless pens
- Bock ready-made fountain pen nib sections
- Clips for kitless pens
- Refillable rollerball nibs for kitless pens
- Drill bits
- Threadable pen blanks for kitless and custom pens
- Lubricant for pen makers
- Tutorial - An introduction to custom pen making
- Casting moulds for pen blanks
- Starbond CA superglue & Epoxy
- Abrasives, steel wool, finishing & polishing
- Beall Wood Buff buffing system
- Beall Wood Threader Kits
- Lathe chucks, lathe centres, faceplates, collet chucks, spindle thread adaptors, spindle thread taps & morse taper arbors
- Shield Technology - lubrication and rust prevention
- Shop by Brand
- Beall
- Beaufort Ink
- Blankwerks
- Bock
- Chestnut Products
- Crafted Makes
- Cullinore
- DiamondCast
- Divine Island
- Flower Girl
- Gilbert House
- GPS Agencies
- Kirinite
- Liberon
- M3 Composites
- Marlas Feathers
- Micromesh
- Minerva
- Mitutoyo
- Penblanks & Moulds
- Rotur
- Semplicita
- Shield Technology
- Starbond
- TapCo
- Versachuck
- Volkel
- Yorkshire Grit
- Beall
- Special offers & clearance
80mm woodturning lathe faceplate - M33 x 3.5mm
Lathe faceplates » Versachuck woodturning lathe faceplates » 80mm woodturning lathe faceplate - M33 x 3.5mm
£18.95
(£15.79 excl. Vat)
Item code: vc-fp33/80
In stock
Produced in the same factory as our popular Versachuck wood lathe chucks, we have 150mm (6 inch) woodturning faceplates, 105mm (4 inch) woodturning faceplates and 80mm (3 inch) woodturning faceplates, in thread sizes to suit the most popular lathe spindle sizes.
All our faceplates are manufactured to give high performance and excellent value for money, and feature holes laid out on metric radial pitches to ensure that you can always get sufficient screws into the workpiece somewhere. The holes are countersunk on the work face side to ensure that any "pull-out" caused by the mounting screws on of the surface of the workpiece this will not prevent the piece lying flat and secure against the faceplate.
These faceplates are t
Lathes using this thread include Nova 1624 II, Galaxi & Saturn, Record Power (2017 models and later - but check!), Wivamac (all models), Zebrano, Laguna, Oneway 2000 series, Oneway 1640, Steinert (all models), Killinger (All models), Stratos, Hegner, Hager, Konig, Flott BD180, Emco DB5, Vicmarc VL200 & 300 (not US, Sorby (some markets), Scheppach DMV200 & DMT180 and Charnwood.