- Pen kits
- Pen blanks
- Marlas Feathers pen blanks
- DiamondCast pen blanks
- Silver series pen blanks
- Radiance Series pen blanks
- Divine Island pen blanks
- Gilbert House pen blanks
- Alternative natural pen blanks
- Alternative semi-precious pen blanks
- GPS California polyester series
- Kirinite acrylic collection
- Kirinite Ice series
- Kirinite Pearl series
- Minerva Acrylics
- Chestnut acrylic collection
- Semplicita SHDC
- Headstrong Hybrids
- Ebonite pen blanks
- Wood pen blanks
- Marlas Feathers pen blanks
- Fountain pen nibs
- Understanding fountain pen nibs & choosing the right one
- Bock standard size 6 nibs (type 250)
- Bock standard size 5 nibs (type 180)
- Beaufort standard size 5 nibs
- Bock short body size 5 nibs (type 060)
- Bock wide shoulder size 5 nibs (type 076)
- Bock standard size 8 nibs (type 380)
- Bock calligraphy (italic) nibs
- Bock twin point calligraphy nibs (type 020)
- Bock 14k music nibs
- Left handed Bock nibs
- Bock ready-made nib sections
- Refillable rollerball nibs
- Understanding fountain pen nibs & choosing the right one
- Fountain pen ink
- Pen Refills
- Pen presentation - Boxes, pouches & display stands
- Writing accessories
- Tools, bushes, drill bits, thread taps & dies
- Pen tubes, springs & spares
- Mechanisms, ink converters & pencil inserts
- Bock ready-made nib sections
- Clips for kitless pens
- Casting moulds
- Special offers & clearance
Less-Resin casting mould for Tempest and Mistral BP/PC pen blanks LR04
£21.95
(£18.29 excl. Vat)
Product code: PBM-LR04
Suitable for Beaufort Mistral ballpoint and pencil kits, and Beaufort Tempest kits, this pen blank mould is made from Addition cure silicone and comes with 4 plugs. Its unique casting "bridge" ensures that both halves of the cast are kept together if being stored. It requires 40 to 50g of resin and is pressure tested to 60psi.
- Suitable for Beaufort Tempest kits and Mistral ballpoint and pencil kits
- Made from Addition Cure silicone
- Supplied with four plugs
- Unique casting “bridge” to keep both blanks together in one piece if being stored
- Requires approx 40 -
50g of resin - Pressure tested to 60psi
