- Pen kits
- Pen kit bushes
- Pen blanks
- Marlas Feathers pen blanks
- DiamondCast pen blanks
- Silver series pen blanks
- Radiance Series pen blanks
- Divine Island pen blanks
- Gilbert House pen blanks
- Crafted Makes- braided and carbon fibre pen blanks
- Blankwerks abalone pen blanks
- Flower Girl pen blanks
- Alternative natural pen blanks
- GPS Ranger pen blanks
- Alternative semi-precious pen blanks
- GPS California polyester series
- Kirinite acrylic collection
- Kirinite Ice series
- Kirinite Pearl series
- Kirinite Stardust Glitter series
- Minerva Acrylics
- Chestnut acrylic collection
- Cullinore Acrylique - acrylic pen blanks
- Semplicita SHDC
- Headstrong Hybrids
- Ebonite pen blanks
- Wood pen blanks
- Marlas Feathers pen blanks
- Fountain pen nibs
- Understanding fountain pen nibs & choosing the right one
- Bock standard size 6 nibs (type 250)
- Bock standard size 5 nibs (type 180)
- Beaufort standard size 5 nibs
- Bock short body size 5 nibs (type 060)
- Bock wide shoulder size 5 nibs (type 076)
- Bock standard size 8 nibs (type 380)
- Bock calligraphy (italic) nibs
- Bock twin point calligraphy nibs (type 020)
- Bock 14k music nibs
- Left handed Bock nibs
- Bock ready-made nib sections
- Refillable rollerball nibs
- Understanding fountain pen nibs & choosing the right one
- Fountain pen ink
- Pen Refills
- Pen presentation - Boxes, pouches & display stands
- Writing accessories
- Pen making tools & drill bits
- Thread taps and dies
- Kitless pen making - tools and supplies for custom pens and bespoke pens
- Tutorial - An introduction to custom pen making
- Collets & collet chuck sets
- Keyless drill chucks
- Tailstock die holders
- Tailstock tap holders
- Morse taper lathe centres
- Triple lead thread taps and dies for pen caps
- Section sleeves and thread sleeves for kitless pens
- Mandrels for kitless pens and custom pen making
- Single lead thread taps and dies for pen components
- Thread taps for Bock fountain pen nib housings
- Thread taps for Bock ready made nib sections
- Thread taps for kitless pen rollerball nibs
- Bock ready-made fountain pen nib sections
- Clips for kitless pens
- Refillable rollerball nibs for kitless pens
- Drill bits
- Threadable pen blanks for kitless and custom pens
- Tutorial - An introduction to custom pen making
- Versachuck wood lathe chucks
- Pen tubes, springs & spares
- Mechanisms, ink converters & pencil inserts
- Bock ready-made nib sections
- Clips for kitless pens
- Casting moulds
- Special offers & clearance
Drill bit HSS 13.5mm
£4.37
(£3.64 excl. Vat)
Product code: db-hss-13.5
Metric/Imperial
Metric
Imperial
Drill size
6mm
7.0mm
7.3mm (Bock #6 housing)
8.1mm (Tempest lower tube)
8.2mm (Mistral BP/PC lower tube)
8.3mm
9.0mm (Mistral BP/PC accent ring)
10.3mm (Tempest upper tube)
10.5mm
10.7mm (Mistral BP/PC upper tube)
11.1mm (Mistral FP/RB accent ring)
11.2mm (Presto Brand)
11.5mm
12.2mm (Presto Brand)
12.3mm
12.5mm
13.2mm (Presto Brand)
13.5mm
We stock all drill bits needed to make every Beaufort Ink pen kit, and a few more besides. See the table below for recommended drill sizes.
| Mistral FP & RB | |||
| Upper | 15/32 | Lower | 25/64 |
| Accent ring | 11.1mm or 7/16 | ||
| Mistral BP & PC | |||
| Upper | 10.7mm | Lower | 8.2mm |
| Accent ring | 10.0mm | ||
| Leveche FP & RB | |||
| Upper | 15/32 | Lower | 25/64 |
| Tempest | |||
| Upper | 10.3mm | Lower | 8.1mm |
| Sirocco | |||
| Single tube | 27/64 | ||
| Zephyr | |||
| Single tube | 27/64 | ||
